## World of Xeen modding and bux fixing

**Moderator:** Moderators

- Rune_Caster
- Assassin
**Posts:**293**Joined:**02 May 2010**Location:**Attacking you behind a wall (Texas)

### World of Xeen modding and bux fixing

Such as the code for the six potions in Sandcaster that if you click on them then press Esc it will still use one of the potion uses, all it needed was another check to see if you clicked on a character or not, if you press Esc or exit out from drinking the potion(s) it goes to line 6 and exits.(XeenIndoorMapEditor)

0 X Y 08 9,0,4

1 X Y 01 3

2 X Y 09 44,1,3

3 X Y 18

4 X Y 32 2,57

5 X Y 09 4,0,7

6 X Y 18

7 X Y 08 9,0,16

8 X Y 08 9,0,15

9 x Y 12 0,0,46,10

10 x Y 01 58

11 X Y 09 44,1,11

12 X Y 34 0,100,100

13 X Y 24 0,0

14 X Y 18

15 X Y 24 8,0

16 X Y 24 7,0

17 X Y 12 0,0,46,10

18 X Y 01 58

19 X Y 09 44,1,20

0 X Y 08 9,0,4

1 X Y 01 3

2 X Y 09 44,1,3

3 X Y 18

4 X Y 32 2,57

5 X Y 09 4,0,7

6 X Y 18

7 X Y 08 9,0,16

8 X Y 08 9,0,15

9 x Y 12 0,0,46,10

10 x Y 01 58

11 X Y 09 44,1,11

12 X Y 34 0,100,100

13 X Y 24 0,0

14 X Y 18

15 X Y 24 8,0

16 X Y 24 7,0

17 X Y 12 0,0,46,10

18 X Y 01 58

19 X Y 09 44,1,20

Last edited by Rune_Caster on Jul 24 2019, 18:05, edited 1 time in total.

- Rune_Caster
- Assassin
**Posts:**293**Joined:**02 May 2010**Location:**Attacking you behind a wall (Texas)

- Rune_Caster
- Assassin
**Posts:**293**Joined:**02 May 2010**Location:**Attacking you behind a wall (Texas)

I have been using the XeenIndoorMapEditor to re-write the coding... example of bark's potion code (re-write)

00 X Y 08 9,0,4

01 X Y 01 17

02 x Y 09 44,1,3

03 X Y 18

04 X Y 32 2,10

05 X Y 09 4,0,7

06 X Y 18

07 X Y 08 9,0,16

08 X Y 08 9,0,15

09 X Y 12 0,0,45,5

10 X Y 01 18

11 x Y 09 9,0,12

12 X Y 34 X,100,00

13 X Y 24 0,0

14 X Y 18

15 X Y 24 8,0

16 X Y 24 7,0

17 X Y 12 0,0,45,5

18 X Y 01 18

19 X Y 09 44,1,20

This code will grant the best bows (which the game never seems to drop due to a bug in the coding )

0 X Y 08 9,0,3

1 X Y 25 42,42,1

2 X Y 18

3 X Y 32 0,6

4 X Y 45 31

5 X Y 20 66,7,0,0,0,0

6 X Y 24 0,0

00 X Y 08 9,0,4

01 X Y 01 17

02 x Y 09 44,1,3

03 X Y 18

04 X Y 32 2,10

05 X Y 09 4,0,7

06 X Y 18

07 X Y 08 9,0,16

08 X Y 08 9,0,15

09 X Y 12 0,0,45,5

10 X Y 01 18

11 x Y 09 9,0,12

12 X Y 34 X,100,00

13 X Y 24 0,0

14 X Y 18

15 X Y 24 8,0

16 X Y 24 7,0

17 X Y 12 0,0,45,5

18 X Y 01 18

19 X Y 09 44,1,20

This code will grant the best bows (which the game never seems to drop due to a bug in the coding )

0 X Y 08 9,0,3

1 X Y 25 42,42,1

2 X Y 18

3 X Y 32 0,6

4 X Y 45 31

5 X Y 20 66,7,0,0,0,0

6 X Y 24 0,0

- Rune_Caster
- Assassin
**Posts:**293**Joined:**02 May 2010**Location:**Attacking you behind a wall (Texas)

- GreatEmerald
- CH Staff
**Posts:**3329**Joined:**24 Jul 2009**Location:**Netherlands

Rune_Caster wrote:00 x Y 32 X,Y (who Will)

01 X Y 08 9,0,4 (If SP =>0, go to line 4, if Esc or SP<0 then go to line 3)

02 X Y 18 (Exit)

04 X Y 08

This seems to work to correct the bug of pressing esc when you select a who will action then press esc...

A) How is the map editor working for you?

B) Let me know when you get some fixed EVT files -- I can help writing a patching utility.

-Cedric

- Rune_Caster
- Assassin
**Posts:**293**Joined:**02 May 2010**Location:**Attacking you behind a wall (Texas)

cedfoo7 wrote:Rune_Caster wrote:00 x Y 32 X,Y (who Will)

01 X Y 08 9,0,4 (If SP =>0, go to line 4, if Esc or SP<0 then go to line 3)

02 X Y 18 (Exit)

04 X Y 08

This seems to work to correct the bug of pressing esc when you select a who will action then press esc...

A) How is the map editor working for you?

B) Let me know when you get some fixed EVT files -- I can help writing a patching utility.

-Cedric

It works for all maps but the maps for Castle Alamar, when ever I try editing the Xeen Power Water events when I try to save I get a error.

- Rune_Caster
- Assassin
**Posts:**293**Joined:**02 May 2010**Location:**Attacking you behind a wall (Texas)

cedfoo7 wrote:A) How is the map editor working for you?

B) Let me know when you get some fixed EVT files -- I can help writing a patching utility.

-Cedric

https://www.dropbox.com/s/lu0a1v8qpggoo ... g.png?dl=0

See the end of this message for details on invoking

just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************

System.OverflowException: Arithmetic operation resulted in an overflow.

at XeenIndoorMapEditor.WriteFiles.RebuildMapText()

at XeenIndoorMapEditor.WriteFiles.WriteFiles()

at XeenIndoorMapEditor.Form1.SaveMe()

at XeenIndoorMapEditor.Form1.btnSave_Click(Object sender, EventArgs e)

at System.Windows.Forms.Control.OnClick(EventArgs e)

at System.Windows.Forms.Button.OnClick(EventArgs e)

at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)

at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)

at System.Windows.Forms.Control.WndProc(Message& m)

at System.Windows.Forms.ButtonBase.WndProc(Message& m)

at System.Windows.Forms.Button.WndProc(Message& m)

at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)

at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)

at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

************** Loaded Assemblies **************

mscorlib

Assembly Version: 2.0.0.0

Win32 Version: 2.0.50727.5485 (Win7SP1GDR.050727-5400)

CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll

----------------------------------------

XeenIndoorMapEditor

Assembly Version: 1.0.0.0

Win32 Version: 1.0.0.0

CodeBase: file:///D:/Powell/Might%20and%20Magic/Wox%20Files/XeenIndoorMapEditor/XeenIndoorMapEditor.exe

----------------------------------------

Microsoft.VisualBasic

Assembly Version: 8.0.0.0

Win32 Version: 8.0.50727.5483 (Win7SP1GDR.050727-5400)

CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.VisualBasic/8.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll

----------------------------------------

System

Assembly Version: 2.0.0.0

Win32 Version: 2.0.50727.5485 (Win7SP1GDR.050727-5400)

CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll

----------------------------------------

System.Windows.Forms

Assembly Version: 2.0.0.0

Win32 Version: 2.0.50727.5483 (Win7SP1GDR.050727-5400)

CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll

----------------------------------------

System.Drawing

Assembly Version: 2.0.0.0

Win32 Version: 2.0.50727.5483 (Win7SP1GDR.050727-5400)

CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll

----------------------------------------

System.Runtime.Remoting

Assembly Version: 2.0.0.0

Win32 Version: 2.0.50727.5488 (Win7SP1GDR.050727-5400)

CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Runtime.Remoting/2.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll

----------------------------------------

System.Xml

Assembly Version: 2.0.0.0

Win32 Version: 2.0.50727.5485 (Win7SP1GDR.050727-5400)

CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll

----------------------------------------

************** JIT Debugging **************

To enable just-in-time (JIT) debugging, the .config file for this

application or computer (machine.config) must have the

jitDebugging value set in the system.windows.forms section.

The application must also be compiled with debugging

enabled.

For example:

<configuration>

<system.windows.forms jitDebugging="true" />

</configuration>

When JIT debugging is enabled, any unhandled exception

will be sent to the JIT debugger registered on the computer

rather than be handled by this dialog box.

- Rune_Caster
- Assassin
**Posts:**293**Joined:**02 May 2010**Location:**Attacking you behind a wall (Texas)

Success!

00 X Y 08 1 9,0,4

01 X Y 01 1 16

02 X Y 09 1 44,1,3

03 X Y 18 1

04 X Y 32 1 2,0

05 X Y 08 1 9,0,7

06 X Y 18

07 X Y 08 1 9,0,16

08 x Y 08 1 9,0,15

09 x Y 12 1 0,0,64,5

10 x Y 01 1

11 x Y 09 1 44,1,12

12 X Y 34 1 0,100,100

13 x Y 24 1 0,0

14 x Y 18 1

15 X Y 24 1 8,0

16 X Y 24 1 7,0

17 X Y 12 1 0,0,64,5

18 X Y 01 1 1

19 x Y 09 1 44,1,20

Xeen power juice 52: Castle Alamar Dungeon basement no longer gives me an error message when trying to save.

00 X Y 08 1 9,0,4

01 X Y 01 1 16

02 X Y 09 1 44,1,3

03 X Y 18 1

04 X Y 32 1 2,0

05 X Y 08 1 9,0,7

06 X Y 18

07 X Y 08 1 9,0,16

08 x Y 08 1 9,0,15

09 x Y 12 1 0,0,64,5

10 x Y 01 1

11 x Y 09 1 44,1,12

12 X Y 34 1 0,100,100

13 x Y 24 1 0,0

14 x Y 18 1

15 X Y 24 1 8,0

16 X Y 24 1 7,0

17 X Y 12 1 0,0,64,5

18 X Y 01 1 1

19 x Y 09 1 44,1,20

Xeen power juice 52: Castle Alamar Dungeon basement no longer gives me an error message when trying to save.

- Rune_Caster
- Assassin
**Posts:**293**Joined:**02 May 2010**Location:**Attacking you behind a wall (Texas)

cedfoo7 wrote:

A) How is the map editor working for you?

B) Let me know when you get some fixed EVT files -- I can help writing a patching utility.

-Cedric

Hey Cedric could you include XeenSGE Darkxx.WOX to the Xeen save files, currently you have to search manually to open a safefile to edit save games. Another note, where is the starting data for Word of Xeen Characters?

I will have to edit a new copy of World of Xeen because I made some changes to stat gains etc...

- Rune_Caster
- Assassin
**Posts:**293**Joined:**02 May 2010**Location:**Attacking you behind a wall (Texas)

Rialdo the Ranger "I will teach anyone pathfinding for 2,500 gold." in Vertigo only charges 2000 gold for pathfinding... Is this a bug? or a mistake?

00 25 26 60 0 60 17,102,2,38,4

01 25 26 01 0 05 10,11,16,2

02 25 26 09 0 32 6,43

03 25 26 08 0 08 9,0,5

04 25 26 01 0 18

05 25 26 09 0 34,208,7,0,0,0,0

06 25 26 09 0 0,0,13,11

Seems like it should read 05 25 26 09 0 34,

00 25 26 60 0 60 17,102,2,38,4

01 25 26 01 0 05 10,11,16,2

02 25 26 09 0 32 6,43

03 25 26 08 0 08 9,0,5

04 25 26 01 0 18

05 25 26 09 0 34,208,7,0,0,0,0

06 25 26 09 0 0,0,13,11

Seems like it should read 05 25 26 09 0 34,

**196,9**,0,0,0,0Definitely reminds me of MM6-8 EVT files.

My patches: MM6 MM7 MM8. MMExtension. Tools. Also, I love Knytt Stories and Knytt Underground. I'm also known as sergroj.

Rune_Caster wrote:

Hey Cedric could you include XeenSGE Darkxx.WOX to the Xeen save files, currently you have to search manually to open a safefile to edit save games. Another note, where is the starting data for Word of Xeen Characters?

I will have to edit a new copy of World of Xeen because I made some changes to stat gains etc...

File MAZE.PTY (0xEE5C) @ 0x377D

The SGE has a major flaw in that it always looks at offset 0x377D for the character information -- it should be searching thru the ToC for the offset, as unpacking/repacking can change the offset.

SGE2 has been on my radar for awhile, but little progress has been made.

- Rune_Caster
- Assassin
**Posts:**293**Joined:**02 May 2010**Location:**Attacking you behind a wall (Texas)

I added the tavern and blacksmith in Lakeside (I tested them they seem to work with out any bugs) So you won't get the messages "These stairs once led to a tavern, but it was destroyed long ago." and "These stairs once led to a blacksmith shop, but it was destroyed long ago." anymore.

I am thinking about adding a If statement to magic wells to prevent + 25, + 50, + 100 etc to non magic using characters - Barbarians, Knights, Thieves and Ninjas so all they will get is a refreshing message.

I am thinking about adding a If statement to magic wells to prevent + 25, + 50, + 100 etc to non magic using characters - Barbarians, Knights, Thieves and Ninjas so all they will get is a refreshing message.

- Rune_Caster
- Assassin
**Posts:**293**Joined:**02 May 2010**Location:**Attacking you behind a wall (Texas)

### Re: So i figured out how to correct a bug in World of Xeen

Adding four lines to temp magic point wells will add a check to see if the character is a knight, robber, ninja or barbarian and will display "The water is cool and refreshing." just like if you had gray magic points, otherwise it will continue with some minor code changes...

00 X Y 32 2,3

01 X Y 40 2

02 X Y 09 5,0,12 Class is 0=Knight

03 X Y 09 5,5,12 Class is 5=Robber

04 X Y 09 5,6,12 Class is 6=Ninja

05 X Y 09 5,7,12 Class is 7=Barbarian

06 X Y 09 81,0,12 (go to line 12)

07 X Y 12 0,0,9,250

08 x Y 01 4 + 250 Spell Points

09 x Y 09 44,1,10

10 x Y 12 0,0,103,19

11 x Y 18

12 X Y 01 5 The water is cool and refreshing.

13 x Y 09 44,1,14

0x05 Class

5,0,12 0=Knight

5,5,12 5=Robber

5,6,12 6=Ninja

5,7,12 7=Barbarian

00 X Y 32 2,3

01 X Y 40 2

02 X Y 09 5,0,12 Class is 0=Knight

03 X Y 09 5,5,12 Class is 5=Robber

04 X Y 09 5,6,12 Class is 6=Ninja

05 X Y 09 5,7,12 Class is 7=Barbarian

06 X Y 09 81,0,12 (go to line 12)

07 X Y 12 0,0,9,250

08 x Y 01 4 + 250 Spell Points

09 x Y 09 44,1,10

10 x Y 12 0,0,103,19

11 x Y 18

12 X Y 01 5 The water is cool and refreshing.

13 x Y 09 44,1,14

0x05 Class

5,0,12 0=Knight

5,5,12 5=Robber

5,6,12 6=Ninja

5,7,12 7=Barbarian

- Talin_Trollbane
- Swordsman
**Posts:**595**Joined:**23 Apr 2006**Location:**Up North

### Re: So i figured out how to correct a bug in World of Xeen

Alright, get a general patch out and we will happily play it.

Ultima, Elder Scrolls and Might and Magic Veteran.

- GreatEmerald
- CH Staff
**Posts:**3329**Joined:**24 Jul 2009**Location:**Netherlands

### Re:

Rune_Caster wrote:I added the tavern and blacksmith in Lakeside (I tested them they seem to work with out any bugs) So you won't get the messages "These stairs once led to a tavern, but it was destroyed long ago." and "These stairs once led to a blacksmith shop, but it was destroyed long ago." anymore.

Curious, is there any game code that sets the blacksmith items to some particular values unique to Lakeside, or does it use the item pattern of some other town?

### Who is online

Users browsing this forum: No registered users and 12 guests